Wireless Controls and Automation  

Industrial Wireless Radio Controls 

  Part      Channels  
915401   Single (1)  
915402   Two     (2)
915404   Four    (4) 
915408   Eight   (8)   
Please Request latest price

Aluminum or Fiber Enclosure

6 miles ( 10 km ) line-of-sight
 Extended range up to 20 km
Operation: 120/240VAC or 12VDC
Transmitter input N/O Dry contact
Receiver with signal strength indicator ■■■ ■ ■
Relay Output SPDT, 6A @250VAC Class 2 pilot duty
Heavy Duty NEMA4, IP65  enclosure
License free operation MURS band
Factory configured systems, Ready to operate
No setup or programming required
Not limited to line-of-sight communication
   Specifications      Digital Transmitter
Supply power 120/240VAC or 12VDC /  5watt 
Inputs  N/O Normally Open, digital dry contact
Transmitter power per FCC Part 15.249,  50mV/m @ 3m
Transmission Digital Encoded   Gaussian_frequency-shift_keying
Channels 16 addresses per system  GFSK
Input Wiring Din Terminals,  Dry Contact
Response Loop 500 msec
Weight 6.8 lb (3.40kg)  each unit
Dimensions (*) 10"W x 8"H x 4"D (254 x 200 x 100 mm)
FCC ID OHKFMT154 Class B Devices: Designation 20KOF1D

   Specifications      Digital Receiver 
Supply power 120/240VAC or 12VDC /  5watt 
Output   Relay  6Amp, Class 2 pilot duty
Frequency 154MHz  • License free MURS band
Configuration DIP switch factory preset
Compliance FCC CFR part 15.247, 95 sub E
Wiring Screw Terminals
Antenna Z 50 Ohm
Ambient temp  14 to 140 F (-10 to 60 C)
Enclosure  NEMA4, IP65 

  (*)  Final Component layout and Dimension may vary      Antenna Selection
Radio control equipment in not to be used in life safety.
Radio Installations shall be performed by a certified professional.

   Long Range Wireless Systems  915400   FCC Certified ID: OHKFMT154


Industrial Monitoring, Pump control, Monitor remote sites, Tank Level,
Lighting control, Remote Mobile system, PLC remote, SCADA, Gates.
Factory process control,  Alarms, Generators
Solar,  Wire replacement.

    Selection from:
 NEMA4x  fiber enclosure Heavy duty aluminum enclosure

 Pole or Wall mount

     Please Request latest price

  Transmitter 4 Channel   Receiver 4 Channel

Transmission Mode   4 Latching Selection for each channel

1  Continuous (1)
2  Off  Delay Timing
3  Pulse Output

Optional Smart Modules

   5    Fail Safe Module
   6    Start & Stop Module

Basic Package Kit: 
One  Base Transmitter, One  Base Receiver 
Two 34" Omni Antennas with 10ft coaxial cable, NEMA 4 Enclosures & Instructions

    Please Request latest price

                     (1)  Maximum continuous transmission time per FCC; 5 minutes
FCC Class B: Licensed Non Broadcasting Station Transmitter

     Copyright   Electrodepot. All rights reserved